• FOT6481 Mini Fusion Splicer

FOT6481 Mini Fusion Splicer

FOT6481 implements industrial-grade CPU+FPGA structure of high-performance, completely fresh HD optical fiber microscope, imported high-speed motor and aluminum-magnesium alloy materials extensively. Compared with AV6471, our star product, FOT6481 lowers the size by 38%,the weight by 52%, the power consumption by 57%, but improves the speed by 60%, the environment adaptability by 80% and the reliability (MTBF) by 200%. You can get unprecedented fusion splicing experience.



Highlight Features


Precise fiber core alignment, ultra-low fiber fusion splicing consumption

7s fast fusion splicing, 18s highly efficient heating.

320 times image magnification, 5mm fusion splicing for fibers of ultra-short cutting length

300 groups of fusion splicing modes, 100 groups of heating modes

10000 groups of fusion records, 64 images storage

Ceramic presser foot, ceramic V-block, all-in-one fixture

Dual-direction splicing, automatic splicing, intelligent pyrocondensation

USB and SD card interfaces, U-disk automatic software upgrade

Built-in modular lithium battery, supports 220 times of splicing and heating cycles.


Small and light

Small in size and light in weight, the splicer is easy to carry and can be lift by one hand.



Lift it by one hand


Water-resistant, dust-resistant and shock-resistant in design

Water-resistant and dust-resistant can meet IP52 requirements.


Water-resistant test                                   Dust-resistant test


All-in-one fixer

The all-in-one fixture meet fusion splicing demands of multiple fibers, jumpers and

rubber-insulted wires with a cladding diameter of 80~150 μm.

All-in-one optical fiber fixture


Graphical interfaces and touch screen

FOT6481 uses entirely new GUI graphical interfaces and touch screen in design. Operators can set

up the splicer and get to know relevant information of it simply and directly by graphical

interfaces.

Entirely new GUI graphical interfaces and touch screen

Intelligent heat shrinkage

A detection unit is embedded in the heater. The heating function will only be enabled when the

thermal shrinkage tube is put in the heater, to avoid misoperation.

Hear and detection unit

Large-capacity pluggable lithium battery

The built-in pluggable lithium battery with large capacity can answer working demand lasting all

day long (typical 220 times of fusion splicing and heating cycles).

Built-in pluggable lithium battery with large-capacity

Ceramic V-block and ceramic presser foot

Ceramic V-block with high precision brings you convenient and accurate placement of optical

fibers and makes cleanup easy.

High-precision ceramic V-block and presser foot



Specification




Model
FOT6481
Alignment method

Precise core alignment and cladding alignment

Applicable fibers
Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653, ITU-TG.655 and ITU-TG.657.
Optical fiber diameter
Cladding: 80〜150 um, coating layer: 0.1〜3mm
Cutting length

5〜16mm (coated optical fiber diameter^250 um);

10mm (coated optical fiber diameter: 0.25~3mm)

Fusion splicing consumption (typical value)

0.02dB (SMF); 0.01dB (MMF); 0.04dB (DSF); 0.04dB (NZDSF)

Return loss
Better than 60dB
Fusion splicing time (typical value)
7s
Heating time (typical value)
18s
Pulling force test
1.96〜2.25N
Thermal shrinkage tube

60mm, 40mm and a series of thermal shrinkage tubes

Graphical display
High-performance 4.3 inch LCD
Magnification time
320 times/88 times
Fusion splicing record

10000 groups

Battery capacity

11.1V,6400mAh,typical value of fusion splicing and thermal cycle is 220 times

Battery service life
Cycle charging times reach 300〜500, can be replaced by customers
Electrode service life
Typical value is 4000 times, can be replaced by customers
Construction lighting
Built-in lights with high-brightness and wide lighting area
Working environment
Temp:-10〜50°C; hum: 0〜95%RH,height above sea level:0〜6000m
Operation interfaces
GUI graphical operation interfaces
External power

AC: AC100〜240V,60Hz,0〜1.5A; DC: DC10〜15V

External port
USB / SD
Dimensions
120mm (W) x130mm (H) x154mm (D) (without rubber anti-vibration pad)
Weight
1.59kg (host engine),0.37kg (battery)