FOT3401 PON Network Status Tester_Optical Fiber Tester_PRODUCT_PRODUCT/产品_Fusion splicer,fiber tester and fiber tools

FOT3401 PON Network Status Tester

With the popularity of FTTH and the blowout development of optical network terminals, especially in the last one kilometer of FTTx, operators need to check the occupation of free resources on optical ports to reduce the waste of port resources. However, this kind of manual checking is extremely complicated, inefficient,

and will bring huge trouble to users.

FOT502 PON terminal state tester can intelligently check the resource state of optical network termina and intelligently analyze the ONT and PON in PON network without maintenance personnel entering the

user's home OLT status, integrated with PON OPM, VFL,RJ45 cable sequence/length and cable tracking, is an all-round helper in the field of current PON network maintenance and terminal resource inventory.

Inquire Online

——

PON Terminal state tester
PON terminal state detection	Online, broken fiber, terminal failure, large terminal loss, ONT no power, optical cat not inserted
Insert loss	≤1.5dB
Connector	(FC/SC/ST)UPC(APC optional)
PON OPM
310nm(upstream)	-35ddBm~+10dBm
1490nm( down)	-40dBm~+12dBm
1550nm( down)	-40dBm~+25dBm
Unit	m/μ/nW/dBm/dB(REF)
Power accuracy	± 0.5dB
Power resolution	0.01dB
VFL
Wavelength	650nm±20nm
Output power	≥10mW
Mode	CW/1Hz/2Hz
Connector	FC/SC/ST
RJ45 Cable length/ Sequence/Tracking
Range	≤300m
Others
Display	3.5 inches TFT LCD, 320 *480
Storage	≤1000
Interface	Micro USB
Power Supply	Li battery :3.7V/4000mAh, Adapter 5VDC/2A
Battery Life	Standby>20h; Measuring time >12h
Operating Temperature	-10°C~+50°C
Storage temperature	-40°C~+70°C
Relative Humidity	0-95%Non Condensing
Dimensions	173mm×82mm×37mm
Weight	350g
Functions: PON OPM/FL/RJ45 Sequence/RJ45 Line Tracker(Additional purchase detector)/RJ45 Cable length/ Flashlight

Product Features;

l Intelligently check the occupation or idle state of optical network terminal

l Intelligently judge the status of the optical fiber cat; turned off, the end of the optical fiber is disconnected and the optical fiber connector falls off

l The user-defined threshold value can be stored for testing

l Support PON optical power meter and VFL

l Pass/ Fail threshold and calibration wave can be set

l Upload data via USB